How Do I Add Water for modules B2/B3?

  • I’m modeling an infrastructure project where water will be used for constructing roads. Water will also be used for resurfacing & maintenance work which happens every 9 years. I don’t know how to add this in eTool so that it will show in the correct modules and not under Operational Water (module B7). Please advise.

    Hi Jacob,

    Good question! You should be adding the water material inputs under the correct category. Assuming that the appropriate category is ‘External Works > Roads Paths Pavings’, click on the green ‘+Add External Works’ button next to the green ‘+Add Templates’ button.

    In the pop up window, please input the data according to the notes in the image below.

    Note that this method is applicable to ANY material that should be categorised under modules B2/B3.

You must be logged in to reply to this topic.