This topic has 1 reply, 2 voices, and was last updated 8 months, 4 weeks ago by Fei Ngeow.

Offsite manufacturing/ Fabrication Process

Thi Thai Hien 6990 May 3, 2022 at 5:57 am

Hi,

I want to create a template for this roller frame and handrail panel. Which option should be used to capture the impact from the manufacturing equipment item? “Offsite manufacturing/ Fabrication Process” or “Metal working (average) offsite”. Thank you.

Roller frame
https://etoollcd.com/Library/Template/Index/51885

Handrail panel
https://etoollcd.com/Library/Template/Index/51781

For the handrail, I’ve cloned this template:

https://etoollcd.com/Library/Template/Index/51781

Fei Ngeow May 9, 2022 at 10:22 am

Hi Thi Thai Hien,

‘Metal working (average) offsuite’ would be more specific impacts as in you are sure that it’s only steel related fabrication. Whereas ‘Offsite manufacturing/fabrication process’ would be more generic which could cover a whole range of fabrication processes (from plastic injection molding to autoclave oven etc).

If your product/item is mostly made of steel, I’d say the ‘Metal working’ option would be more relevant.

You must be logged in to reply to this topic.