- This topic has 2 replies, 2 voices, and was last updated 3 years, 2 months ago by .
Why the recommendations is showing a 0 % savings against the benchmark
You must be logged in to reply to this topic.
This query came through from one of our users so I thought I’d post it for everybody’s benefit:
Do you know why the recommendations is showing a 0 % savings against the benchmark despite the negative values under initial, GWP and life time? I have checked that the base design model is the reference model that we cloned the below example from.
Hi,
Not sure but these are the two best explanations:
Hope that helps,
Richard
Please note that the software has been updated so that you’re now able to select a different benchmark for each function in the design. This is so that mixed use buildings will be able to compare each function/area with the appropriate benchmark. Therefore, in order to define the benchmark in your design, you will now need to specify that in the ‘Function‘ tab of the design.
You must be logged in to reply to this topic.